Sterling Stereo Plus Anniversary KT88 Hard wired AUDION

Audion Sterling Plus Anniversary stereo is hard wired point to point using better graded components and & larger Audion wound output transformers (EI96)  hand built. This pentode based KT88 stereo amp uses a small amount of feedback in the design. The chassis is black powder coated aluminum as is the transformer cover. The top plate and badge are mirror finished stainless steel.

This larger output power amp. is better suited for more difficult loads, the KT88 is a robust tube that has a good overall sonic performance

Amplifier matching

This Sterling is suited for use with loudspeakers of 87db or better efficiency. Ideally matched with our range of Proton cables. The amp delivers 18 watts into 8 ohms. Options are available for this model, see upgrade options at end.

Quality both inside and out

Having a volume control on the front and stereo inputs on the rear means that a pre-amplifier is not necessary with this unit. The amp is auto biased. It will take almost any KT88 or KT90 or even 6550 tubes (Unit is supplied with JJ KT88 tubes)

The Sterling is a good entry level hard wired (Air Wired©) Class A power amplifier. Integrated option (5 Stereo inputs is available)

The Sterling is built with components sourced from Europe and the US. Where possible we avoid the use of any Chinese component. Our output transformers are wound in-house to our exacting standards and many of the components are either made by us or specifically for us. We use JJ KT88 and Russian New old stock 6H1N as a driver and input tubes.  

2 x 18 Watts Class A  into 8 Ohms at 240V AC

Load:  8 Ohm Nominal

Distortion @ 1Watt:   <0.1% No Feedback

Frequency Response: <10Hz  to >40KHz ±1 db

Consumption: – 160 Watts

Valves: – 2 x KT88, 2 x 6H23N

Sensitivity: Variable >200mV Full output

Noise: < (CCIR) – 85 db

Size:  42cm deep,23cm wide and 19cm tall – Less valves

Weight: 14Kgs stereo, 15Kgs Stereo Integrated, 11Kgs per mono-block

Fuses – Power 2A 240V / 3.5A 120V slow blow.

HT. 500mA 240V / 1A 120V Slow blow