SPECTRUM LD 30W RGB Kvant

LD 30 Spectrum (Low Divergence version of Spectrum 30) is the most powerful version of all LD Spectrums. It comes fitted with a special optics that keep the beam divergence at incredibly low 0.48 mrad (measured at a full angle), resulting in a powerful and unusually bright beam over distance. And although the initial beam size is a bit bigger than on standard systems, with Saturn9 scanners the 30 Kpps speeds and drawing precision are easily maintained.

LD 30 Spectrum lasers are suitable for long-range outdoor projections.

Highlights of the Spectrum:

a lot brighter than a standard non-LD system

low divergence of only 0.48 mrad at a full angle

30 Kpps Saturn9 scanning

Colour Balance display mode

robust construction

optional Motorised Dichroic Filters for quick and easy beam alignment

integrated Pangolin FB4 control interface as standard with Pangolin QuickShow 4.0 laser control and creation software included

direct control from most lighting consoles over the ArtNet

Every KVANT laser system is delivered with a Quality Control Certificate. The certificate includes the power output measurement of each laser wavelength within the system.

Specifications

Source | Type: semiconductor diode & OPSL | full-colour RGB laser projector

Suitability: outdoor laser displays [atmospheric, abstract, text, animations]

System control:FB4-SK [Ethernet, ArtNet, DMX, ILDA | PC, Lighting Console or Autoplay]

Compliant with:EN 60825-1 [tested by TÜV SÜD], FDA

Weight [kg]: 36

Size [WxHxD, mm]: 510 x 273 x 396

Guaranteed opt. output [mW]: 28000

R | G | B [mW]:7300 | 10000 | 11500 [*see note A below]

Wavelengths [nm, ±5nm]:637 | 532 OPSL | 460+445

Beam size [mm]:10 x 10

Beam divergence [mrad]:0.48 [full angle, averaged value, *see note B below]

Modulation [kHz] | type: 100 | analogue

X-Y scanners: Saturn9 | 30kpps @ 8°, max. 40°

Power requirements [V] | Input:100-230/50-60Hz | Neutrik powerCON TRUE1

Max. power consumption [VA]: 1200

Operation temperature [°C]: 10-40

Included in the set: Heavy-duty flight case, 1.5M power lead, 25M Ethernet rj45 signal cable, E-STOP remote with 30M 3-pin XLR cable, set of 4 safety keys, interlock connector [for the USA only], USB memory stick with the user manual. Pangolin QuickShow laser control and creation software is available for FREE download.

HW features: All the basic system settings and adjustments such as power output adjustment for each colour, X & Y axes invert, X & Y size and position, etc. are managed via the built-in FB4 control interface. Scanning system overload protection.

Laser safety features: Keyed interlock, emission delay, magnetic interlock, scan-fail safety, fast electromechanical shutter [reaction time <20ms], adjustable aperture masking plate, Emergency STOP system with keyed remote and manual RESTART button.

note A:Due to Advanced Optical Correction technology used in Kvant systems, the real power output of each laser module installed within the system may slightly differ from its specification. This doesn't affect the total guaranteed power output of the system.

note B:The beam divergence total is calculated as an average arithmetic value of all individual colours. The divergence of each colour is calculated as:

1. FWHM of the beam cross-section for round beams, or

2. The arithmetic average of the beam's horizontal and vertical divergence for all rectangular beams.