SPECTRUM LD 25W RGBY Kvant

LD 25 Spectrum RGBY is our top of the range "super-laser" - one of the two that will make you the brightest!

With an extra 5W/577nm yellow OPSL head inside for doubled total luminosity, and together with special Low Divergence optics which intensifies the output even further and beyond, this LD Spectrum RGBY system is way superior to others. In fact, it is brighter than anything else we've seen so far, except for its 33 Watt bigger brother of course.

LD Spectrum 25 RGBY will take anything you throw at it. Festivals? Tours? Theme parks? So be it! There's just nothing better out there for the job. Again, except for its even more powerful brother - the LD 33 Spectrum RGBY.

Highlights of the Spectrum:

extreme brightness thanks to the extra 5W/577nm yellow laser and Low Divergence output optics; comparable with standard 60-80 Watts RGB systems

30 Kpps Saturn9 scanning

Colour Balance display mode

robust construction

optional Motorised Dichroic Filters for quick and easy beam alignment

integrated Pangolin FB4 control interface as standard with Pangolin QuickShow 4.0 laser control and creation software included

direct control from most lighting consoles over the ArtNet

Every KVANT laser system is delivered with a Quality Control Certificate. The certificate includes the power output measurement of each laser wavelength within the system.

Specifications

Source | Type: semiconductor diode & OPSL | full-colour RGBY laser projector

Suitability: outdoor laser displays [atmospheric, abstract, text, animations]

System control:FB4-SK [Ethernet, ArtNet, DMX, ILDA | PC, Lighting Console or Autoplay]

Compliant with:EN 60825-1 [tested by TÜV SÜD], FDA

Weight [kg]: 37

Size [WxHxD, mm]: 510 x 273 x 396

Guaranteed opt. output [mW]: 25000

R | Y | G | B | [mW]: 6000 | 5000 | 8000 | 6000 [*see note A below]

Wavelengths [nm, ±5nm]:637 | 577 OPSL | 532 OPSL | 445

Beam size [mm]:10 x 10

Beam divergence [mrad]:0.41 [full angle, averaged value, *see note B below]

Modulation [kHz] | type: 100 | analogue

X-Y scanners: Saturn9 | 30kpps @ 8°, max. 40°

Power requirements [V] | Input:100-230/50-60Hz | Neutrik powerCON TRUE1

Max. power consumption [VA]: 1540

Operation temperature [°C]: 10-40

Included in the set: Heavy-duty flight case, 1.5M power lead, 25M Ethernet rj45 signal cable, E-STOP remote with 30M 3-pin XLR cable, set of 4 safety keys, interlock connector [for the USA only], USB memory stick with the user manual. Pangolin QuickShow laser control and creation software is available for FREE download.

HW features: All the basic system settings and adjustments such as power output adjustment for each colour, X & Y axes invert, X & Y size and position, etc. are managed via the built-in FB4 control interface. Scanning system overload protection.

Laser safety features: Keyed interlock, emission delay, magnetic interlock, scan-fail safety, fast electromechanical shutter [reaction time <20ms], adjustable aperture masking plate, Emergency STOP system with keyed remote and manual RESTART button.

note A:Due to Advanced Optical Correction technology used in Kvant systems, the real power output of each laser module installed within the system may slightly differ from its specification. This doesn't affect the total guaranteed power output of the system.

note B:The beam divergence total is calculated as an average arithmetic value of all individual colours. The divergence of each colour is calculated as:

1. FWHM of the beam cross-section for round beams, or

2. The arithmetic average of the beam's horizontal and vertical divergence for all rectangular beams.