SPECTRUM 10W OPSL RGB Kvant

Spectrum 10 OPSL was designed specifically for laser graphics projections. Nothing compares to the Spectrum OPSL when it comes to that. The combination of our know-how, craftsmanship and Coherent OPSL HD technology are what make this laser series unbeatable in many ways. These systems feature a true TEM00 beam profile which offers the best possible beam characteristics for graphical laser displays.

Razor sharp beams and high speed Saturn1 scanning from Pangolin delivers superb performance which we reckon will impress even the most demanding users.

Highlights of the Spectrum:

0.34 mrad full angle divergence for

60 Kpps Saturn1 scanning as standard

Colour Balance display mode

robust construction

optional Motorised Dichroic Filters for quick and easy beam alignment

integrated Pangolin FB4 control interface as standard with Pangolin QuickShow 4.0 laser control and creation software included

direct control from most lighting consoles over the ArtNet

Every KVANT laser system is delivered with a Quality Control Certificate. The certificate includes the power output measurement of each laser wavelength within the system.

Specifications

Source | Type: OPSL | full-colour RGB laser projector

Suitability: indoor/outdoor HD laser graphics

System control:FB4-SK [Ethernet, ArtNet, DMX, ILDA | PC, Lighting Console or Autoplay]

Compliant with: EN 60825-1 [tested by TÜV SÜD], FDA

Weight [kg]: 36

Size [WxHxD, mm]: 510 x 273 x 396

Guaranteed opt. output [mW]: 9500

R | G | B [mW]:2500 | 5000 | 2000 [*see note A below]

Wavelengths [nm, ±5nm]:639 OPSL | 532 OPSL | 480 OPSL

Beam size [mm]:4

Beam divergence [mrad]:0.34 [full angle, averaged value, *see note B below]

Modulation [kHz] | type: 100 | analogue

X-Y scanners: Saturn1 | 60 Kpps @ 7°, max. 60°

Power requirements [V] | Input:100-230/50-60Hz | Neutrik powerCON TRUE1

Max. power consumption [VA]: 1540

Operation temperature [°C]: 10-40

Included in the set: Heavy-duty flight case, 1.5M power lead, 25M Ethernet rj45 signal cable, E-STOP remote with 30M 3-pin XLR cable, set of 4 safety keys, interlock connector [for the USA only], USB memory stick with the user manual. Pangolin QuickShow laser control and creation software is available for FREE download.

HW features: All the basic system settings and adjustments such as power output adjustment for each colour, X & Y axes invert, X & Y size and position, etc. are managed via the built-in FB4 control interface. Scanning system overload protection.

Laser safety features: Keyed interlock, emission delay, magnetic interlock, scan-fail safety, fast electromechanical shutter [reaction time <20ms], adjustable aperture masking plate, Emergency STOP system with keyed remote and manual RESTART button.

note A:Due to Advanced Optical Correction technology used in Kvant systems, the real power output of each laser module installed within the system may slightly differ from its specification. This doesn't affect the total guaranteed power output of the system.

note B:The beam divergence total is calculated as an average arithmetic value of all individual colours. The divergence of each colour is calculated as:

1. FWHM of the beam cross-section for round beams, or

2. The arithmetic average of the beam's horizontal and vertical divergence for all rectangular beams.