SA6 6 Way SPI Signal Splitter ● 1group SPI signal input, 6 group SPI signal output. ● Amplication and expansion of SPI (TTL) signals. ● Used with SPI controller, applied to synchronous control multiple SPI digital RGB or RGBW LED strips. Technical Parameters Input and Output Input voltage: 5-24VDC Input Current: Max. 30A Standby power: < 0.5W Input signal: 1 group SPI (TTL) signal Output signal: 6 group SPI (TTL) signals Environment Operation temperature: Ta: -20°C ~ +55°C Case temperature (Max.

Directly connect led bar, Extension cables each more than 10m, need add one amplifier

1. Input voltage:110V~230V 2. Output Voltage:5V/12V/24V 3. Gray:256~65536 4. Pixel:680pixel 5.ARTNET 6.MAX power:150W

1. Input voltage:110V~220V 2. Plug and play 24v 3. 8*680pixel 4. 256~65536 Grayscale 5. Supports HDMI(DVI) or Artnet 6. MAX power:1400W

Art-Net Controller is an Ethernet driver based on Artnet protocol. It can convert network packets in Artnet protocol into standard DMX512 data or SPI data controller. Single port output, up to 6000 pixels can be output. Can record on the line effect, can record up to 31 effects, can call play effect, speed, brightness and so on through DMX. Application area: It is widely used in LED lattice and stage lighting control network which needs a lot of DMX512 data. Signal input: 100m Ethernet interface

Big Mounting to bar for LED Tube StripArt Kudux

Robust and reliable, ENTTEC’s CVC4 is the ultimate high fidelity, constant voltage (CV) LED dimmer. Designed and made in Australia, the CVC4 is the next evolution of the ENTTEC constant voltage LED dimmer, building upon the CVC3 and DIN-LED4PX constant voltage led driver. Capable of controlling up to 20A across its four 5A channels at either a 16- or 8-bit resolution, the CVC4’s ultra-smooth dimming, auto-addressing functionality and simple mode selection make it one of the most comprehensive ye

D12A 12 Channel Constant Voltage DMX512 & RDM Decoder / Master ● 12 channels constant voltage output, Max. 5A current per channel, up to 1440W output power. ● Master & decoder mode, RDM function. ● Easy operation with OLED display and 4 buttons. ● DIM/CCT/RGB decoding mode selectable. ● PWM frequency 500/2000/8000/16000Hz selectable. ● 16bit (65536 levels) /8bit (256 levels) grey level selectable. ● Output dimming curve gamma value 0.1-9.9 selectable. ● Stand-alone RGB mode and 12 channel dimmer

D24 24 Channel Constant Voltage DMX512 & RDM Decoder ● Comply with the DMX512 standard protocols. ● Digital numeric display, set DMX decode start address by buttons. ● RDM function can realize intercommunication between DMX master and decoder. For example, DMX decoder address can be set by DMX master console. ●16bit (65536 levels) /8bit (256 levels) grey level selectable. ● PWM frequency 500/1000/2000/4000/8000/16000/32000Hz selectable. ● Logarithmic or linear dimming curve selectable. ● Stand-a

D24B 24 Channel Constant Voltage DMX512 & RDM Decoder / Master ● 24 channels constant voltage output, Max. 4A current per channel, up to 2304W output power. ● Master & decoder mode, RDM function. ● Easy operation with OLED display and 4 buttons. ● DIM/CCT/RGB/RGBW decoding mode selectable. ● PWM frequency 500/2000/8000/16000Hz selectable. ● 16bit (65536 levels) /8bit (256 levels) grey level selectable. ● Output dimming curve gamma value 0.1-9.9 selectable. ● Stand-alone RGBW mode and 24 channel

● Comply with the DMX512 standard protocols. ● Digital numeric display, set DMX decode start address by buttons. ● RDM function can realize intercommunication between DMX master and decoder. For example, DMX decoder address can be set by DMX master console. ● 1/2/4 DMX channel output selectable. ● 16bit (65536 levels) /8bit (256 levels) grey level selectable. ● PWM frequency 250/500/1000/2000/4000/8000/16000/32000Hz selectable. ● Logarithmic or linear dimming curve selectable. ● Stand-alone RGB/

● DALI repeater with integrated DALI power supply. ● Enhancement and transmission of DALI signals(bidirectional). ● DALI commands from any control unit are transmitted in all DALI-lines. ● Electrical insulation between the main control circuit and the subordinate control circuit. ● Star or cascade network layout installation require only a single master to operate. ● In single-master applications star networks with multiple repeaters can be set up. ● Cascaded network layout with up to 3 repeater

● One DMX512&RDM signal input, two DMX512&RDM signal output. ● Dedicated to amplify, distribute and insulate the signal that comes from the lighting system equipment when it is connected to the bus of DMX512&RDM(or RS-485). ● Realize extending DMX512&RDM signal transmission distance. ● Signals expansion output control, increase DMX&RDM (485) signal amplifier to distribute multi-channel control. ● Supports bi-directional communication for addressing and controlling RDM devices. ● Optical isolatio

Kudux digital LED strips are professional elements used to build lighting scenography, illuminating decorative elements and everywhere where it is required to control individual LED pixel on the tape. Kudux LED digital strips are available in 5V, 12V and 24V and the density of LEDs per meter from 30 to 144 RGB 5050 LED modules. The offer includes tapes with IP20 to IP68 tightness classes. Technical parameters: Supply voltage: 12V Number of LEDs: 144 / m Light source: RGB 5050 LED Control process

Kudux digital LED strips are professional elements used to build lighting scenography, illuminating decorative elements and everywhere where it is required to control individual LED pixel on the tape. Kudux LED digital strips are available in 5V, 12V and 24V and the density of LEDs per meter from 30 to 144 RGB 5050 LED modules. The offer includes tapes with IP20 to IP68 tightness classes. Technical parameters: Supply voltage: 12V Power: 35W/m Number of LEDs: 144 / m Light source: RGB 5050 LED Co

Kudux digital LED strips are professional elements used to build lighting scenography, illuminating decorative elements and everywhere where it is required to control individual LED pixel on the tape. WS2813 fast control drivers ensure continuity of operation even in the event of a failure of the LED diode - the remaining elements on the tape work normally. Kudux LED digital strips are available in 5V, 12V and 24V and the density of LEDs per meter from 30 to 144 RGB 5050 LED modules. The offer i

A smart, cost-effective lighting control solution, the DIN Pixie is a compact, DIN-rail mountable, DMX to LED pixel protocol converter engineered to take any architectural, commercial or entertainment project to the next level. 2-universe DMX to SPI pixel converter & standalone player. ENTTEC’s DIN PIXIE is a robust and reliable installation-grade DMX-to-SPI pixel converter and standalone player designed to make control of LED pixels easy. Pre-program, or run live – it’s your choice. Use its DMX

● Comply with the DMX512 standard protocols. ● Digital numueric dispaly, set DMX decode start address by buttons. ● RDM function can realize intercommunication between DMX master and decoder. For example, DMX decoder address can be set by DMX master console. ● 1/2/4 DMX channel output selectable. ● 0-10V or 1-10V output selectable. ● Logarithmic or linear dimming curve selectable. ● Stand-alone RGB/RGBW mode and 4 channel dimmer mode selectable, which be controlled by buttons with built-in progr

● Paste anywhere touch/hand sweep sensor switch head, used with various sensor controllers. ● Can detect touch or hand sweep movement through non-metallic materials such as wood, acrylic, plastic and glass. ● Low voltage 5VDC supply with 5V level or PWM signal output. ● Touch sensing: short press to turn on/off the light, long press to adjust the brightness. ● Hand sweep sensing: hand sweep once the light fade on, sweep again the light fade off; hand stay moment can be set dimmable or non-dimmab

ELAR EXTQW Flood HP Elation – mocny reflektor do scen, koncertów i eventów. Wytrzymały, wydajny, idealny do profesjonalnego oświetlenia.

● Laser sensing switch, 12-24VDC input, constant voltage output, connect to low voltage LED strip. ● When the sensor head detects the person or object in front of it, the light will be turned on. ● Detection distance 0.05-2.5m, sensing angle 20°. ● Auto ranging and manual ranging modes are available. ● Set the sensing detection distance by powering up or pressing the key. ● Six delay off times can be set (5, 10, 30, 60, 180, 0s). ● Rapid fading of light at the moment of switching. ● Suitable for