SA6 6 Way SPI Signal Splitter ● 1group SPI signal input, 6 group SPI signal output. ● Amplication and expansion of SPI (TTL) signals. ● Used with SPI controller, applied to synchronous control multiple SPI digital RGB or RGBW LED strips. Technical Parameters Input and Output Input voltage: 5-24VDC Input Current: Max. 30A Standby power: < 0.5W Input signal: 1 group SPI (TTL) signal Output signal: 6 group SPI (TTL) signals Environment Operation temperature: Ta: -20°C ~ +55°C Case temperature (Max.

Robust and reliable, ENTTEC’s CVC4 is the ultimate high fidelity, constant voltage (CV) LED dimmer. Designed and made in Australia, the CVC4 is the next evolution of the ENTTEC constant voltage LED dimmer, building upon the CVC3 and DIN-LED4PX constant voltage led driver. Capable of controlling up to 20A across its four 5A channels at either a 16- or 8-bit resolution, the CVC4’s ultra-smooth dimming, auto-addressing functionality and simple mode selection make it one of the most comprehensive ye

D12A 12 Channel Constant Voltage DMX512 & RDM Decoder / Master ● 12 channels constant voltage output, Max. 5A current per channel, up to 1440W output power. ● Master & decoder mode, RDM function. ● Easy operation with OLED display and 4 buttons. ● DIM/CCT/RGB decoding mode selectable. ● PWM frequency 500/2000/8000/16000Hz selectable. ● 16bit (65536 levels) /8bit (256 levels) grey level selectable. ● Output dimming curve gamma value 0.1-9.9 selectable. ● Stand-alone RGB mode and 12 channel dimmer

D24 24 Channel Constant Voltage DMX512 & RDM Decoder ● Comply with the DMX512 standard protocols. ● Digital numeric display, set DMX decode start address by buttons. ● RDM function can realize intercommunication between DMX master and decoder. For example, DMX decoder address can be set by DMX master console. ●16bit (65536 levels) /8bit (256 levels) grey level selectable. ● PWM frequency 500/1000/2000/4000/8000/16000/32000Hz selectable. ● Logarithmic or linear dimming curve selectable. ● Stand-a

D24B 24 Channel Constant Voltage DMX512 & RDM Decoder / Master ● 24 channels constant voltage output, Max. 4A current per channel, up to 2304W output power. ● Master & decoder mode, RDM function. ● Easy operation with OLED display and 4 buttons. ● DIM/CCT/RGB/RGBW decoding mode selectable. ● PWM frequency 500/2000/8000/16000Hz selectable. ● 16bit (65536 levels) /8bit (256 levels) grey level selectable. ● Output dimming curve gamma value 0.1-9.9 selectable. ● Stand-alone RGBW mode and 24 channel

● Comply with the DMX512 standard protocols. ● Digital numeric display, set DMX decode start address by buttons. ● RDM function can realize intercommunication between DMX master and decoder. For example, DMX decoder address can be set by DMX master console. ● 1/2/4 DMX channel output selectable. ● 16bit (65536 levels) /8bit (256 levels) grey level selectable. ● PWM frequency 250/500/1000/2000/4000/8000/16000/32000Hz selectable. ● Logarithmic or linear dimming curve selectable. ● Stand-alone RGB/

● DALI repeater with integrated DALI power supply. ● Enhancement and transmission of DALI signals(bidirectional). ● DALI commands from any control unit are transmitted in all DALI-lines. ● Electrical insulation between the main control circuit and the subordinate control circuit. ● Star or cascade network layout installation require only a single master to operate. ● In single-master applications star networks with multiple repeaters can be set up. ● Cascaded network layout with up to 3 repeater

● One DMX512&RDM signal input, two DMX512&RDM signal output. ● Dedicated to amplify, distribute and insulate the signal that comes from the lighting system equipment when it is connected to the bus of DMX512&RDM(or RS-485). ● Realize extending DMX512&RDM signal transmission distance. ● Signals expansion output control, increase DMX&RDM (485) signal amplifier to distribute multi-channel control. ● Supports bi-directional communication for addressing and controlling RDM devices. ● Optical isolatio

A smart, cost-effective lighting control solution, the DIN Pixie is a compact, DIN-rail mountable, DMX to LED pixel protocol converter engineered to take any architectural, commercial or entertainment project to the next level. 2-universe DMX to SPI pixel converter & standalone player. ENTTEC’s DIN PIXIE is a robust and reliable installation-grade DMX-to-SPI pixel converter and standalone player designed to make control of LED pixels easy. Pre-program, or run live – it’s your choice. Use its DMX

● Comply with the DMX512 standard protocols. ● Digital numueric dispaly, set DMX decode start address by buttons. ● RDM function can realize intercommunication between DMX master and decoder. For example, DMX decoder address can be set by DMX master console. ● 1/2/4 DMX channel output selectable. ● 0-10V or 1-10V output selectable. ● Logarithmic or linear dimming curve selectable. ● Stand-alone RGB/RGBW mode and 4 channel dimmer mode selectable, which be controlled by buttons with built-in progr

● Paste anywhere touch/hand sweep sensor switch head, used with various sensor controllers. ● Can detect touch or hand sweep movement through non-metallic materials such as wood, acrylic, plastic and glass. ● Low voltage 5VDC supply with 5V level or PWM signal output. ● Touch sensing: short press to turn on/off the light, long press to adjust the brightness. ● Hand sweep sensing: hand sweep once the light fade on, sweep again the light fade off; hand stay moment can be set dimmable or non-dimmab

● Laser sensing switch, 12-24VDC input, constant voltage output, connect to low voltage LED strip. ● When the sensor head detects the person or object in front of it, the light will be turned on. ● Detection distance 0.05-2.5m, sensing angle 20°. ● Auto ranging and manual ranging modes are available. ● Set the sensing detection distance by powering up or pressing the key. ● Six delay off times can be set (5, 10, 30, 60, 180, 0s). ● Rapid fading of light at the moment of switching. ● Suitable for

EV4-X 4 Channel Constant Voltage Power Repeater ● 12-24V constant voltage power repeater. ● 4 channel, 8A per channel. ● To receive PWM signal control. ● Power repeater in series or in parallel to expand output unlimitedly. ● Apply to single color, dual color, RGB or RGBW constant voltage LED strip or module Technical Parameters Input and Output Input voltage: 12-24VDC Input current: 32.5A Input signal: PWM Output voltage: 4 x (12-24V)DC Output current: 4CH, 8A/CH Output power: 4 x (96-192)W Out

MADRIX AURA is the advanced lighting control recorder and stand-alone playback unit. Developed and made in Germany. 4 versions are available: AURA 2 AURA 8 AURA 12 AURA 32 The MADRIX AURA is the central stand-alone controller for simple recording and large-scale pixel mapping. It redefines what is possible in a compact control unit with exceptional performance. Stand-Alone Playback Independently run the most sophisticated light shows from this energy-efficient playback unit via Art-Net or Stream

MADRIX AURA is the advanced lighting control recorder and stand-alone playback unit. Developed and made in Germany. SKU: MADIA-HW-001029 3 versions are available: AURA 2 AURA 8 AURA 32 The MADRIX AURA is the central stand-alone controller for simple recording and large-scale pixel mapping. It redefines what is possible in a compact control unit with exceptional performance. Stand-Alone Playback Independently run the most sophisticated light shows from this energy-efficient playback unit via Art-

MADRIX AURA is the advanced lighting control recorder and stand-alone playback unit. Developed and made in Germany. SKU: MADIA-HW-001025 3 versions are available: AURA 2 AURA 8 AURA 32 The MADRIX AURA is the central stand-alone controller for simple recording and large-scale pixel mapping. It redefines what is possible in a compact control unit with exceptional performance. Stand-Alone Playback Independently run the most sophisticated light shows from this energy-efficient playback unit via Art-

MADRIX NEBULA is a flexible LED pixel tape driver to directly control a wide range of digital LEDs. Developed and made in Germany. New Second Generation: 2 Ethernet Ports and Daisy-Chain Support! New firmware 2.0: Streaming ACN, Channel Offset, Channel Order, Output In Case Of Connection Loss, and more! The MADRIX NEBULA directly connects to your LED pixels. This advanced SPI decoder receives control data over Ethernet network or USB and is built to provide excellent image quality. SPI Converter

MODUS ADL-01 ARTNET 2CH SPI LED Digital Strip is a driver for digital LEDs with ArtNet protocol support. It is powered from safe voltage in the range of 12-24VDC. Has an external power input or can be powered via Passive POE. It is ideal for controlling digital LED strips and digital LED modules in a permanent installation. The device has 2 independent outputs with the possibility of connecting up to 170 RGB pixels on each of the outputs. Thanks to the flat housing, we can mount the controller n

eDMX to SPI pixel controller delivering 8 universes of pixel data in a compact, affordable 4-module DIN rail form factor. Compact 8-Universe LED Pixel Controller The OCTO LITE is a compact LED pixel controller that delivers 8 universes of eDMX-to-pixel conversion in a 4-module DIN-rail form factor. Supporting up to 1,360 RGB or 1,024 RGBW pixels per controller, this SPI pixel controller unit handles Art-Net, sACN, and ESP protocols with the same proven OCTO architecture trusted in installations

eDMX to SPI pixel controller with Standalone Mode & Overdrive feature capable of transmitting up to 32 universes of SPI data in a compact 4-module DIN-rail form factor. Unleash unprecedented power with 32 universe capacity and flexible port configuration The OCTO MK3 is a powerful quad-output eDMX to LED pixel converter with overdrive mode, transmitting up to 32 universes. Robust and reliable, it connects directly to LED lights, elevating architectural, commercial, and entertainment projects. De

A smart, cost-effective lighting control solution, the Pixelator Mini is a compact 16 Universe rack, surface & DIN-rail mountable, eDMX to LED pixel protocol converter. Control LED pixels with ease ENTTEC’s Pixelator Mini is an installation-grade Ethernet pixel converter designed to make control of LED pixel dots and strip simple. In total, the Pixelator Mini can convert up to 8,192 channels (2,730 RGB pixels) across its 8 PLink outputs (2 Universes per port) with perfect synchronisation across