SA6 6 Way SPI Signal Splitter ● 1group SPI signal input, 6 group SPI signal output. ● Amplication and expansion of SPI (TTL) signals. ● Used with SPI controller, applied to synchronous control multiple SPI digital RGB or RGBW LED strips. Technical Parameters Input and Output Input voltage: 5-24VDC Input Current: Max. 30A Standby power: < 0.5W Input signal: 1 group SPI (TTL) signal Output signal: 6 group SPI (TTL) signals Environment Operation temperature: Ta: -20°C ~ +55°C Case temperature (Max.

AADC-01 ARTNET 0-10V ANALOGUE is an 8-channel converter of 0-10V analog signals to standard ArtNET signal.

● Ideal cost efficient 6 channel mini DMX fader console. ● Easy usage. ● Suitable for permanent installations by using available brackets. ● Ideal for sample testing and trouble-shooting on-site or workshops. ● Powered by 3 x AAA batteries or external 5-24V power-supply. ● 3 digit LED screen 0 -100% or DMX000 -DMX255 (settings by dip-switch). ● 6 channel mode, 5 channel or master mode (settings by dip-switch). Technical Parameters: Input and Output Input voltage: 5–24 VDC or 3 × AAA Work current

ARL-01 ARTNET 8CH RELAY is a module of 8 relays controlled by ArtNet protocol. Check our full offer on trade2.mediam.com

MODUS ARL-08 is a module of 8 relays controlled by the ArtNet protocol or optionally by UDP commands. Check our full offer on trade2.mediam.com

MODUS ARS-01 ARTNET RS232 is ArtNet to RS232 signal converter. Check our full offer on trade2.mediam.com

D12A 12 Channel Constant Voltage DMX512 & RDM Decoder / Master ● 12 channels constant voltage output, Max. 5A current per channel, up to 1440W output power. ● Master & decoder mode, RDM function. ● Easy operation with OLED display and 4 buttons. ● DIM/CCT/RGB decoding mode selectable. ● PWM frequency 500/2000/8000/16000Hz selectable. ● 16bit (65536 levels) /8bit (256 levels) grey level selectable. ● Output dimming curve gamma value 0.1-9.9 selectable. ● Stand-alone RGB mode and 12 channel dimmer

D24 24 Channel Constant Voltage DMX512 & RDM Decoder ● Comply with the DMX512 standard protocols. ● Digital numeric display, set DMX decode start address by buttons. ● RDM function can realize intercommunication between DMX master and decoder. For example, DMX decoder address can be set by DMX master console. ●16bit (65536 levels) /8bit (256 levels) grey level selectable. ● PWM frequency 500/1000/2000/4000/8000/16000/32000Hz selectable. ● Logarithmic or linear dimming curve selectable. ● Stand-a

D24B 24 Channel Constant Voltage DMX512 & RDM Decoder / Master ● 24 channels constant voltage output, Max. 4A current per channel, up to 2304W output power. ● Master & decoder mode, RDM function. ● Easy operation with OLED display and 4 buttons. ● DIM/CCT/RGB/RGBW decoding mode selectable. ● PWM frequency 500/2000/8000/16000Hz selectable. ● 16bit (65536 levels) /8bit (256 levels) grey level selectable. ● Output dimming curve gamma value 0.1-9.9 selectable. ● Stand-alone RGBW mode and 24 channel

● Comply with the DMX512 standard protocols. ● Digital numeric display, set DMX decode start address by buttons. ● RDM function can realize intercommunication between DMX master and decoder. For example, DMX decoder address can be set by DMX master console. ● 1/2/4 DMX channel output selectable. ● 16bit (65536 levels) /8bit (256 levels) grey level selectable. ● PWM frequency 250/500/1000/2000/4000/8000/16000/32000Hz selectable. ● Logarithmic or linear dimming curve selectable. ● Stand-alone RGB/

The MODUS DMX Audio Player plays back music tracks, voice announcements, sound effects, etc. in MP3 and WAV formats. You can play 255 files stored in 99 directories. The device is equipped with a class-D stereo amplifier with 2x15W power, capable of driving low-ohm speakers or sets with a resultant resistance of at least 4ohm. Trigger connector allows you to connect an external trigger device such as a button, motion detector, reed switch, etc., and using it to activate the device's functions Bu

● DALI repeater with integrated DALI power supply. ● Enhancement and transmission of DALI signals(bidirectional). ● DALI commands from any control unit are transmitted in all DALI-lines. ● Electrical insulation between the main control circuit and the subordinate control circuit. ● Star or cascade network layout installation require only a single master to operate. ● In single-master applications star networks with multiple repeaters can be set up. ● Cascaded network layout with up to 3 repeater

● One DMX512&RDM signal input, two DMX512&RDM signal output. ● Dedicated to amplify, distribute and insulate the signal that comes from the lighting system equipment when it is connected to the bus of DMX512&RDM(or RS-485). ● Realize extending DMX512&RDM signal transmission distance. ● Signals expansion output control, increase DMX&RDM (485) signal amplifier to distribute multi-channel control. ● Supports bi-directional communication for addressing and controlling RDM devices. ● Optical isolatio

DC 1024 DIN - is a universal DMX controller supporting 2 x 512 DMX channels. Check our offer on trade2.mediam.com

DEI 001 - Digital Ethernet Interface - is a driver that allows to control LED strips and modules through the Ethernet port.

● Comply with the DMX512 standard protocols. ● Digital numueric dispaly, set DMX decode start address by buttons. ● RDM function can realize intercommunication between DMX master and decoder. For example, DMX decoder address can be set by DMX master console. ● 1/2/4 DMX channel output selectable. ● 0-10V or 1-10V output selectable. ● Logarithmic or linear dimming curve selectable. ● Stand-alone RGB/RGBW mode and 4 channel dimmer mode selectable, which be controlled by buttons with built-in progr

DVI 001 – a DVI driver for LED strips and modules, which allows to convert DVI video signal to a web protocol controlling popular LED strips

● Paste anywhere touch/hand sweep sensor switch head, used with various sensor controllers. ● Can detect touch or hand sweep movement through non-metallic materials such as wood, acrylic, plastic and glass. ● Low voltage 5VDC supply with 5V level or PWM signal output. ● Touch sensing: short press to turn on/off the light, long press to adjust the brightness. ● Hand sweep sensing: hand sweep once the light fade on, sweep again the light fade off; hand stay moment can be set dimmable or non-dimmab

● Laser sensing switch, 12-24VDC input, constant voltage output, connect to low voltage LED strip. ● When the sensor head detects the person or object in front of it, the light will be turned on. ● Detection distance 0.05-2.5m, sensing angle 20°. ● Auto ranging and manual ranging modes are available. ● Set the sensing detection distance by powering up or pressing the key. ● Six delay off times can be set (5, 10, 30, 60, 180, 0s). ● Rapid fading of light at the moment of switching. ● Suitable for

EV4-X 4 Channel Constant Voltage Power Repeater ● 12-24V constant voltage power repeater. ● 4 channel, 8A per channel. ● To receive PWM signal control. ● Power repeater in series or in parallel to expand output unlimitedly. ● Apply to single color, dual color, RGB or RGBW constant voltage LED strip or module Technical Parameters Input and Output Input voltage: 12-24VDC Input current: 32.5A Input signal: PWM Output voltage: 4 x (12-24V)DC Output current: 4CH, 8A/CH Output power: 4 x (96-192)W Out

The M807SA SPI LED DRIVER has 8 outputs, supports a maximum of 8196 pixels, supports the Art-Net protocol, and can work with a DMX console