SA6 6 Way SPI Signal Splitter ● 1group SPI signal input, 6 group SPI signal output. ● Amplication and expansion of SPI (TTL) signals. ● Used with SPI controller, applied to synchronous control multiple SPI digital RGB or RGBW LED strips. Technical Parameters Input and Output Input voltage: 5-24VDC Input Current: Max. 30A Standby power: < 0.5W Input signal: 1 group SPI (TTL) signal Output signal: 6 group SPI (TTL) signals Environment Operation temperature: Ta: -20°C ~ +55°C Case temperature (Max.

D12A 12 Channel Constant Voltage DMX512 & RDM Decoder / Master ● 12 channels constant voltage output, Max. 5A current per channel, up to 1440W output power. ● Master & decoder mode, RDM function. ● Easy operation with OLED display and 4 buttons. ● DIM/CCT/RGB decoding mode selectable. ● PWM frequency 500/2000/8000/16000Hz selectable. ● 16bit (65536 levels) /8bit (256 levels) grey level selectable. ● Output dimming curve gamma value 0.1-9.9 selectable. ● Stand-alone RGB mode and 12 channel dimmer

D24 24 Channel Constant Voltage DMX512 & RDM Decoder ● Comply with the DMX512 standard protocols. ● Digital numeric display, set DMX decode start address by buttons. ● RDM function can realize intercommunication between DMX master and decoder. For example, DMX decoder address can be set by DMX master console. ●16bit (65536 levels) /8bit (256 levels) grey level selectable. ● PWM frequency 500/1000/2000/4000/8000/16000/32000Hz selectable. ● Logarithmic or linear dimming curve selectable. ● Stand-a

D24B 24 Channel Constant Voltage DMX512 & RDM Decoder / Master ● 24 channels constant voltage output, Max. 4A current per channel, up to 2304W output power. ● Master & decoder mode, RDM function. ● Easy operation with OLED display and 4 buttons. ● DIM/CCT/RGB/RGBW decoding mode selectable. ● PWM frequency 500/2000/8000/16000Hz selectable. ● 16bit (65536 levels) /8bit (256 levels) grey level selectable. ● Output dimming curve gamma value 0.1-9.9 selectable. ● Stand-alone RGBW mode and 24 channel

● Comply with the DMX512 standard protocols. ● Digital numeric display, set DMX decode start address by buttons. ● RDM function can realize intercommunication between DMX master and decoder. For example, DMX decoder address can be set by DMX master console. ● 1/2/4 DMX channel output selectable. ● 16bit (65536 levels) /8bit (256 levels) grey level selectable. ● PWM frequency 250/500/1000/2000/4000/8000/16000/32000Hz selectable. ● Logarithmic or linear dimming curve selectable. ● Stand-alone RGB/

● DALI repeater with integrated DALI power supply. ● Enhancement and transmission of DALI signals(bidirectional). ● DALI commands from any control unit are transmitted in all DALI-lines. ● Electrical insulation between the main control circuit and the subordinate control circuit. ● Star or cascade network layout installation require only a single master to operate. ● In single-master applications star networks with multiple repeaters can be set up. ● Cascaded network layout with up to 3 repeater

● One DMX512&RDM signal input, two DMX512&RDM signal output. ● Dedicated to amplify, distribute and insulate the signal that comes from the lighting system equipment when it is connected to the bus of DMX512&RDM(or RS-485). ● Realize extending DMX512&RDM signal transmission distance. ● Signals expansion output control, increase DMX&RDM (485) signal amplifier to distribute multi-channel control. ● Supports bi-directional communication for addressing and controlling RDM devices. ● Optical isolatio

● Comply with the DMX512 standard protocols. ● Digital numueric dispaly, set DMX decode start address by buttons. ● RDM function can realize intercommunication between DMX master and decoder. For example, DMX decoder address can be set by DMX master console. ● 1/2/4 DMX channel output selectable. ● 0-10V or 1-10V output selectable. ● Logarithmic or linear dimming curve selectable. ● Stand-alone RGB/RGBW mode and 4 channel dimmer mode selectable, which be controlled by buttons with built-in progr

● Paste anywhere touch/hand sweep sensor switch head, used with various sensor controllers. ● Can detect touch or hand sweep movement through non-metallic materials such as wood, acrylic, plastic and glass. ● Low voltage 5VDC supply with 5V level or PWM signal output. ● Touch sensing: short press to turn on/off the light, long press to adjust the brightness. ● Hand sweep sensing: hand sweep once the light fade on, sweep again the light fade off; hand stay moment can be set dimmable or non-dimmab

● Laser sensing switch, 12-24VDC input, constant voltage output, connect to low voltage LED strip. ● When the sensor head detects the person or object in front of it, the light will be turned on. ● Detection distance 0.05-2.5m, sensing angle 20°. ● Auto ranging and manual ranging modes are available. ● Set the sensing detection distance by powering up or pressing the key. ● Six delay off times can be set (5, 10, 30, 60, 180, 0s). ● Rapid fading of light at the moment of switching. ● Suitable for

EV4-X 4 Channel Constant Voltage Power Repeater ● 12-24V constant voltage power repeater. ● 4 channel, 8A per channel. ● To receive PWM signal control. ● Power repeater in series or in parallel to expand output unlimitedly. ● Apply to single color, dual color, RGB or RGBW constant voltage LED strip or module Technical Parameters Input and Output Input voltage: 12-24VDC Input current: 32.5A Input signal: PWM Output voltage: 4 x (12-24V)DC Output current: 4CH, 8A/CH Output power: 4 x (96-192)W Out

MODUS ADL-01 ARTNET 2CH SPI LED Digital Strip is a driver for digital LEDs with ArtNet protocol support. It is powered from safe voltage in the range of 12-24VDC. Has an external power input or can be powered via Passive POE. It is ideal for controlling digital LED strips and digital LED modules in a permanent installation. The device has 2 independent outputs with the possibility of connecting up to 170 RGB pixels on each of the outputs. Thanks to the flat housing, we can mount the controller n

● AC phase-cut mosfet dimmer with DMX512 function, two channel output. ● Comply with the DMX512 standard protocols. ● Digital numeric display, set DMX decode start address by bottons. ● RDM function can realize intercommunication between DMX master and decoder. ● 1/2 DMX channel output selectable. ● Reverse-phase dimming or forward-phase dimming selectable. ● Minimum brightness set from 1% to 40%. ● Stand-alone dynamic mode and 2 channel dimmer mode selectable, which be controlled by buttons wit

•MOSFET dimmer with AC phase cut, single-channel output, max. 6 A. •For dimming and switching single-colour dimmable LED lamps, traditional incandescent bulbs and halogen bulbs. •256 dimming levels from 0–100%, smooth and flicker-free. •Six dimming modes: rotary knob, DALI, DMX512, 1–10 V, 2.4 GHz RF, AC Push-Dim. •Turning the knob adjusts the brightness; supports single-press, double-press and long-press operations. •Compliant with the standard DALI protocol (IEC 62386-102, IEC 62386-205) and c

● 4096 levels 0-100% dimming smoothly without any ash. ● Match with RF 2.4G single zone or multiple zone dimming remote control. ● One RF controller accept up to 10 remote control. ● Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance. ● Synchronize on multiple number of controllers. ● Connect with external push switch to achieve on/off and 0-100% dimming function. ● Light on/off fade time 3s selectable. ● Easy to be placed in stan