SA6 6 Way SPI Signal Splitter ● 1group SPI signal input, 6 group SPI signal output. ● Amplication and expansion of SPI (TTL) signals. ● Used with SPI controller, applied to synchronous control multiple SPI digital RGB or RGBW LED strips. Technical Parameters Input and Output Input voltage: 5-24VDC Input Current: Max. 30A Standby power: < 0.5W Input signal: 1 group SPI (TTL) signal Output signal: 6 group SPI (TTL) signals Environment Operation temperature: Ta: -20°C ~ +55°C Case temperature (Max.

● Comply with the DMX512 standard protocols. ● Digital numueric dispaly, set DMX decode start address by buttons. ● RDM function can realize intercommunication between DMX master and decoder. For example, DMX decoder address can be set by DMX master console. ● 1/2/4 DMX channel output selectable. ● 0-10V or 1-10V output selectable. ● Logarithmic or linear dimming curve selectable. ● Stand-alone RGB/RGBW mode and 4 channel dimmer mode selectable, which be controlled by buttons with built-in progr

● DALI repeater with integrated DALI power supply. ● Enhancement and transmission of DALI signals(bidirectional). ● DALI commands from any control unit are transmitted in all DALI-lines. ● Electrical insulation between the main control circuit and the subordinate control circuit. ● Star or cascade network layout installation require only a single master to operate. ● In single-master applications star networks with multiple repeaters can be set up. ● Cascaded network layout with up to 3 repeater

● Laser sensing switch, 12-24VDC input, constant voltage output, connect to low voltage LED strip. ● When the sensor head detects the person or object in front of it, the light will be turned on. ● Detection distance 0.05-2.5m, sensing angle 20°. ● Auto ranging and manual ranging modes are available. ● Set the sensing detection distance by powering up or pressing the key. ● Six delay off times can be set (5, 10, 30, 60, 180, 0s). ● Rapid fading of light at the moment of switching. ● Suitable for

● Paste anywhere touch/hand sweep sensor switch head, used with various sensor controllers. ● Can detect touch or hand sweep movement through non-metallic materials such as wood, acrylic, plastic and glass. ● Low voltage 5VDC supply with 5V level or PWM signal output. ● Touch sensing: short press to turn on/off the light, long press to adjust the brightness. ● Hand sweep sensing: hand sweep once the light fade on, sweep again the light fade off; hand stay moment can be set dimmable or non-dimmab

● 4096 levels 0-100% dimming smoothly without any ash. ● Match with RF 2.4G single zone or multiple zone dimming remote control. ● One RF controller accept up to 10 remote control. ● Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance. ● Synchronize on multiple number of controllers. ● Connect with external push switch to achieve on/off and 0-100% dimming function. ● Light on/off fade time 3s selectable. ● Easy to be placed in stan