MADRIX LUNA 16

MADRIX LUNA is an easy-to-use and reliable network node.

Developed and made in Germany.

3 versions with different port counts are available:

LUNA 4 / LUNA 8 / LUNA 16

The MADRIX LUNA reliably distributes DMX512 data over long or short distances using Ethernet network or USB. Its sync mode makes sure that lighting effects look their best on the LEDs.

Art-Net / Streaming ACN / USB

Art-Net or Streaming ACN data is directly converted to DMX512. Optimize and decentralize cabling to cover any distance to the device using Ethernet network.

Any small or large project greatly benefits from dependable data distribution and efficient operation. Use any compatible software or hardware controller. In addition, simply connect to MADRIX 5 over USB.

4/8/16 DMX-OUT + 1 DMX-IN

4, 8, or 16 XLR ports (5-pin, female) distribute the equal number of DMX universes per unit. 1 XLR port (5-pin, male) can be used for DMX input. Simply use several units at the same time for larger projects.

Sync Mode

MADRIX 5 and MADRIX hardware allow you to synchronize Art-Net data for all output ports and even across multiple devices to get an optimal image on the LEDs without visual interruptions.

Easy Configuration

MADRIX LUNA offers powerful features, especially in combination with MADRIX 5. Take full advantage of pixel mapping and voxel mapping. The installation of the device is still quick and easy.

3rd-Party Controllers

MADRIX LUNA complies with the official protocol specifications and can be used as a regular node with your other consoles, controllers, or software solutions.

Quality Design

Devices are built 19″ x 1U or 19″ x 2U. They feature a fanless, noiseless, low-energy design, a durable metal case, and NEUTRIK plugs. 2 premounted brackets make rack mounting possible. 5 indicators quickly show the status of a device.

Invaluable Features

The device is ready within seconds after startup. HTP merging is automatically available for two Ethernet sources. Its firmware is upgradable for future enhancements. Access and change specific device settings using the built-in web configuration page.

Connectivity

4x/8x/16x DMX-OUT

1x DMX-IN

1x RJ45 Ethernet port

1x USB port

1x Power socket

Package Contents

1x MADRIX LUNA

1x Power cord (IEC C13)

1x USB 2.0 cable (certified)

2x Rack-mount brackets (already mounted to the device)

1x Technical manual / quick start guide

Did You Know?

As a receiving unit, the 100 MBit/s RJ45 Ethernet connection is more than enough. In our FAQs and especially for large projects, we recommend to use Art-Net and 1 GBit/s for the network switch and network card. For the sender of all the data, the higher bandwidth is required. Often, Art-Net data is sent in broadcast mode where all receivers get all the data. With MADRIX 5 however, we also support unicast with the Direct IP mode to just sent the required data to each single unit to save bandwidth. In all cases, MADRIX LUNA provides the performance you need.

Technical Specifications

Power Supply: AC 100 V – 240 V, 50-60 Hz, 0.4 A max., IEC C14 inlet

Power Consumption: < 5 W during normal operation

Network Protocols: Art-Net (I, II, 3, 4, incl. ArtSync), Streaming ACN (sACN / ANSI E1.31)

DMX512 (OUT): 16x 512 DMX channels output

DMX512 (IN): 1x 512 DMX channels input

Ports (OUT): 5-pin, XLR, female, NEUTRIK

Port (IN): 5-pin, XLR, male, NEUTRIK

Ethernet: 1x RJ45, Auto MDI-X, NEUTRIK etherCON, 10/100 MBit/s (Compatible with 1 GBit/s)

USB: 1x port, USB 2.0, type-B female socket

Handling: 5 status LEDs

Case: Metal enclosure

Size: 19˝ x 2U

Dimensions (Body Only): 76 mm x 440 mm x 44 mm (Length x Width x Height)

Dimensions (Total): 76 mm x 482.6 mm x 44 mm (Length x Width x Height)

76 mm x 482.6 mm x 88 mm (Length x Width x Height)

Weight: 2.0 kg

Temperature Range: -10 °C to 60 °C (Operating) | -20 °C to 70 °C (Storage)

Relative Humidity: 20 % to 80 %, non-condensing (Operating / Storage)

IP Rating: IP20

Certificates: CE, EAC, FCC, RoHS

Warranty: 5 years of limited manufacturer's warranty

It Is Your Choice

MADRIX products are proudly designed, engineered, and made in Germany. We are creating high-quality products for you that are easy to use and reliable. Innovative features will bring you the best results. And opting for such highly manageable products means that you can drastically reduce on-site support; and thus your time and costs. But it does not stop there.

We Have Made Ours

We feel that our responsibility is more than just creating prime products. We are also responsible of how we create them. We are intentionally choosing eco power for our office. We have deliberately chosen cardboard as the main part of our product packaging, since it is a renewable resource. In this way, we are also actively minimizing our plastics usage to reduce the environmental impact.