LOGOLAS G10 laser projector green 10W Kvant

The LogoLas G10 laser projector is suitable for applications such as the replacement of green LED strips and neon tubes often used for building illumination and signage, laser billboard projection medium, or fast-to-react tool for public flow control, traffic control and announcements during emergencies.

IMPORTANT FEATURES:

Discrete look and robust IP rated design tested and approved by an independent testing lab. We increased impermeability with high-quality seals, IP rated connectors, and possibly the best IP rated cooling fans on the market.

Smooth front panel with sunk aperture glass and an internal heating element around aperture prevents the snow and ice from getting stuck at the output window and eliminates the inside dew.

The two-ply top lid fitted with a layer of thermal foam enhances the outside heat resistance.

The access into the inside of the unit via the top lid is secured with two lockable hatches.

The housing can be painted in white [RAL9010] or grey [RAL9007] as standard, but also powder-coated to any other RAL colour on request.

Supplied brackets and fixings include those for installation onto walls and flat surfaces. There is also available an optional bracket for secure installation onto posts with an external diameter between 40 and 100mm.

Low divergence Coherent OPSL laser head ensures high brightness at long projection distances. The premium quality laser source is manufactured by Coherent and uses the latest OPS laser technology.

40 Kpps scanning speed with default CM-506 scanner se.

If only a single-beam output is required, the LogoLas can be supplied without scanners and fitted with an external collimator [beam expander] for exceptionally bright long-distance beam projections.

The standard built-in FB4 control interface allows for control from a PC or lighting console via Ethernet and ArtNet.

Logolas can be factory fitted with a PASS card for enhanced laser safety.

The optional camera system provides the user with a live preview of the LogoLas output via GSM network or IP protocol [Pangolin BEYOND licence is necessary for the initial setup of the camera].

Specifications

Source | Type: Optically Pumped Semiconductor Laser | single colour GREEN laser projector

Suitability: permanent indoor / outdoor laser displays

System control:FB4-SK [Ethernet, ArtNet, Autoplay | PC or Lighting Console]

Compliant with:EN 60825

Ingress protection rating: IP65 certified

Weight [kg]: 21

Size - laser projector [mm]: 377 x 252 x 600 [WxHxD]

Size - incl. bracket [mm]: 377 x 447 x 726 [WxHxD]

Guaranteed opt. output [W]: 10

Green laser module [W]:10 | Coherent OPSL

Wavelength [nm, ±5nm]: 532

Beam size [mm]:5

Beam divergence [mrad]:<1 [full angle, *see note A below]

Modulation [kHz] | type: 100 | analogue

X-Y scanners: CM-506 | 40 Kpps @ 8° [Options available below] or NO scanners, but with the Beam Expander

Power requirements [V] | Input: 100-230/50-60Hz

Max. power consumption [VA]: 600

Operation temperature [°C]: 0-40 [currently being tested in the range -20 to +40 degrees]

Included in Standard set: LogoLas laser system, flat surface bracket and wall mount bracket with fixings, 5M power lead, 5M Ethernet rj45 signal cable, E-STOP remote with 5M 3-pin XLR cable, set of 2 keys for the lid and 2 E-STOP keys, interlock bypass dongle [supplied for the USA only], USB memory stick with the user manual. Pangolin QuickShow laser control and creation software is available for FREE download.

Everything is safely packed and delivered in a plywood pallet export box.

HW features: All the basic system settings and adjustments such as power output adjustment, X & Y axes invert, X & Y size and position, etc. are managed via the built-in FB4 control interface.

The laser system is equipped with a scanning system overload protection.

Laser safety features: Keyed interlock, emission delay, magnetic interlock, scan-fail safety, fast electromechanical shutter [reaction time <20ms], adjustable aperture masking plate, Emergency STOP system with keyed remote and manual RESTART button.

note A:*The beam divergence total is calculated as an average arithmetic value of all individual colours. The divergence of each colour is calculated as:

1. FWHM of the beam cross-section for round beams, or

2. The arithmetic average of the beam's horizontal and vertical divergence for all rectangular beams.