DIN ETHERGATE ENTTEC

Product Description

With 2 universes of bi-directional eDMX to DMX conversion with Art-RDM support, power over ethernet (PoE) or flexible 7-24v DC input, the DIN Ethergate allows for fast deployment of DMX systems compatible with a wide range of devices.

Next-generation Ethernet to DMX/RDM adapter

The DIN Ethergate is a robust and reliable, installation-grade, DMX node that has been engineered to connect physical DMX devices to your Ethernet network infrastructure. Now you can expand your network entertainment project to the next level.

With two Universes of bi-directional eDMX to DMX conversion with Art-RDM support, the DIN Ethergate is compatible with a wide range of devices and allows for fast deployment of your DMX system. Simply connect, configure and take control!

In addition, this Ethernet to DMX/RDM adapter is packed with installer-friendly features for fast installation and configuration, all managed through the user interface. All contained within a compact and electrically-insulated 4-DIN-module width unit form factor.

In a nutshell

Two bi-directional DMX/ E1.20 RDM ports with optional termination and RDM support.

IEEE 802.3af PoE (Power over Ethernet) or DC 7-24v input.

Surface or TS35 DIN-rail mount.

Support for Art-Net 4, sACN and ESP to DMX conversion.

Support for DMX -> Art-Net (Broadcast or Unicast) / DMX -> ESP (Broadcast or Unicast) / DMX -> sACN (Multicast or Unicast).

HTP/LTP merging support for up to 2 DMX sources.

Pluggable terminal blocks and inbuilt DMX termination.

Intuitive device configuration and updates through the inbuilt web interface.

Surface or TS35 DIN rail mount.

10/100 Mbps network speed.

‘Current Port Buffer’ allows live DMX values to be viewed.

Configurable refresh rate.

Protocols

The DIN Ethergate’s primary functionality is to convert between Ethernet-DMX protocols and USITT DMX512-A (DMX). The following conversions are available with the DIN

Ethergate:

Art-Net -> DMX (with / without RDM. ANSI E1.20 RDM supported)

DMX -> Art-Net (Broadcast or Unicast)

sACN -> DMX

DMX -> sACN (Multicast or Unicast)

ESP -> DMX

DMX -> ESP (Broadcast or Unicast)

Features

Easy web page configuration

The configuration is managed through the localhost web interface to simplify commissioning and updates as well as to allow the DIN Ethergate to be configured from any computer on your network.

Flexible power options

Power the DIN Ethergate using IEEE 802.3af PoE (Power over Ethernet) or DC 7-24v input.

Sync mode

All ENTTEC Ethernet hardware accepts ArtSync to fully synchronize Art-Net data for all output ports and across your installation when receiving Art-Net from the same source.

Time-saving and installer-friendly

Our Ethernet to DMX converter is packed with installer-friendly features including pluggable terminal connectors and inbuilt DMX termination to simplify wiring. Also, a ‘Current Port Buffer’ within the web interface allows live DMX values to be viewed from the web interface to troubleshoot your installation. Upon receiving power, the device is ready to go within seconds.

Monitor activity

The forward-facing LED indicator allows your device status to be monitored quickly with just a glance.

Flexible mounting options

Featuring a 4-DIN-module electrically-insulated housing, the DIN-Ethergate’s slim form includes a DIN-rail clip enabling attachment to a TS35 DIN-rail alongside the option to wall mount the device in any orientation.

Specification:

Connectors"

1* LAN port (RJ45)

2* Bi-directional DMX (4 Pin Phoenix)

1* Power Input (2 Pin Phoenix)

IP rating" IP20

LED Indicators:

Forward facing status indicator

Network Link / Activity indicators (RJ45 Port)

eDMX protocols:

Art-Net

Art-RDM

sACN

ESP

DMX protocols:

USITT DMX512-A

ANSI E1.20 RDM

DMX & RDM timings:

Break time: 200ms

Mark after Break (MAB): 20ms

Art-Net merging: 2 Sources

Max. channels: 2 universes (1024ch)

Max. refresh rate: 43FPS

Network Speed: 10/100Base-T

Power over Ethernet: IEEE 802.3af

Network configuration: Static (default 192.168.0.10) / DHCP.

Firmware updates: Through web interface

Inbuilt DMX termination: Yes

DC input voltage: 7-24V DC

Max. power draw: 7W

Max. heat dissipation: 7W

Operating temperature:

0°C to 50°C

32°F to 122°F

Operating humidity: 5- 95% (non-condensing)

Body material: ABS plastic

Mounting options:

Surface mount

TS35 DIN-Rail mount

Warranty: 3 year return to base manufacturer warranty

Unit dimensions: 100.5 * 72.25 * 34mm

Unit weight: 0.11kg / 0.24lbs

Shipping dimensions: 140 * 140* 40mm

Shipping weight: 0.16kg / 0.35lbs