ATOM LD 33W RGBY Kvant
KVANT LD 33 Atom RGBY is our most powerful Atom in the range. This high-power laser system is equipped with Low Divergence output optics, making the beam divergence as low as 0.48 mrad at a full angle.
The addition of 5W/577nm OPSL yellow module to the setup doubles the amount of luminosity this Atom outputs. As a result of both these features, this laser projector's beams are a lot brighter than those from typical 30-50W RGB lasers.
This robust system is built to last, is suitable for touring and hire, and it's equipped with the 30 Kpps Saturn9 scanning as standard. Besides other ways of control, it can be controlled directly from a lighting desk over the ArtNet.
Every KVANT laser system is delivered with a Quality Control Certificate. The certificate includes the power output measurement of each laser wavelength within the system.
Source | Type: semiconductor diode & OPSL | full-colour LD-RGBY laser projector
Suitability: outdoor laser displays [atmospheric, abstract, text, animations]
System control:FB4-SK [Ethernet, ArtNet, DMX, ILDA | PC, Lighting Console or Autoplay]
Compliant with:EN 60825-1 [tested by TÜV SÜD], FDA
Weight [kg]: 37
Size [WxHxD, mm]: 510 x 273 x 396
Guaranteed opt. output [mW]: 33000
R | Y | G | B | [mW]: 7300 | 5000 | 9400 | 11500 [*see note A below]
Wavelengths [nm, ±5nm]:637 | 577 OPSL | 520 | 460+445
Beam size [mm]:10 x 10
Beam divergence [mrad]: 0.48 [full angle, averaged value, *see note B below]
Modulation [kHz] | type: 100 | analogue
X-Y scanners: Saturn9 | 30 Kpps @ 8°, max. 40°
Power requirements [V] | Input:100-230/50-60Hz | Neutrik powerCON TRUE1
Max. power consumption [VA]: 1800
Operation temperature [°C]: 10-40
Included in the set: Heavy-duty flight case, 1.5M power lead, 25M Ethernet rj45 signal cable, E-STOP remote with 30M 3-pin XLR cable, set of 4 safety keys, interlock connector [for the USA only], USB memory stick with the user manual. Pangolin QuickShow laser control and creation software is available for FREE download.
HW features: All the basic system settings and adjustments such as power output adjustment for each colour, X & Y axes invert, X & Y size and position, etc. are managed via the built-in FB4 control interface. Scanning system overload protection.
Laser safety features: Keyed interlock, emission delay, magnetic interlock, scan-fail safety, fast electromechanical shutter [reaction time <20ms], adjustable aperture masking plate, Emergency STOP system with keyed remote and manual RESTART button.
note A:Due to Advanced Optical Correction technology used in Kvant systems, the real power output of each laser module installed within the system may slightly differ from its specification. This doesn't affect the total guaranteed power output of the system.
note B:The beam divergence total is calculated as an average arithmetic value of all individual colours. The divergence of each colour is calculated as:
1. FWHM of the beam cross-section for round beams, or
2. The arithmetic average of the beam's horizontal and vertical divergence for all rectangular beams.