ARL-01 ARTNET 8CH RELAY MODUS

ARL-01 ARTNET 8CH RELAY is a module of 8 relays controlled by ArtNet protocol.

It is powered by a safe voltage in the range of 12-24VDC. It has an external power input or can be powered via Passive POE.

It is ideal for switching stage equipment as well as in a permanent installation.

Each of the 8 relays can be controlled individually and can be assigned to any channel within a universe and subuniverse, giving you tremendous flexibility in configuring and customizing the module for your installation.

Thanks to the flat 35mm DIN rail housing, we can mount the controller in a standard switchboard, which provides convenience of installation and ease of maintaining order in your installation.

The used system of standard RJ45 connectors for Ethernet and detachable screw connectors for power input and relays makes installation and later operation easy.

The device uses reverse polarity protection for the power supply voltage and overload protection. They protect not only the relay module but also the controlled device from damage.

The module works in LAN and is controlled by the popular ArtNet protocol.

It works with the dedicated MODUS DevManager software, so that the entire configuration is done remotely via Ethernet. This is ideal for mounting the device in hard-to-reach places.

The device has potential-free relay outputs, which provides galvanic separation of the module from the switched device - this ensures the safety and security of the installation. The module can switch on devices with a maximum current consumption of 1A and voltage of 125V.

It has the ability to configure individually for each output:

- type of NO/NC contacts (combined/separable)

- assignment of each relay output to any channel within one universe and subuniverse

 - the level of value from which activation occurs

- remote test of the outputs (possibility to switch the output on and off at the configuration stage)

- setting the default state of the output

- user description for each output

Technical parameters

- Outputs:8x relay outputs

- RJ45 (Ethernet, ArtNet)

Power input

- Power supply:12-24V DC, 200mA

- Passive PoE or power connector

- Mounting:DIN/TH/TS 35 rail

- Dimensions:90/31/104 mm

- Configuration using DevManager software.

The manufacturer reserves the right to make changes in the functioning and operation of the device to improve the product