AADC-01 ARTNET 0-10V ANALOGUE MODUS

AADC-01 ARTNET 0-10V ANALOGUE is an 8-channel converter of 0-10V analog signals to standard ArtNET signal. It is powered from a safe voltage in the range of 12-24VDC. It has an external power input or can be powered via Passive POE.

It is ideal for converting 0-10V standard to ArtNET, and can also be successfully used as an analog input module in automation systems with ArtNET protocol.

Each of the 8 inputs can be assigned to any channel within a universe and subuniverse, this gives great possibilities for configuration and customization of the module for installation.

Thanks to the 35mm flat DIN rail housing, we can mount the converter in a standard switchboard, which provides convenience of installation and ease of maintaining order in your installation.

The used system of standard RJ45 connectors for Ethernet and detachable screw connectors for power input and 0-10V signal inputs makes installation and later operation easy.

There is reverse polarity protection for the power supply voltage and overload protection. It also protects 0-10V signal inputs against reverse polarity of the signal as well as against signals of too high a value. A number of protections protect not only the converter but also the controlled device from damage.

The converter works in LAN and is compatible with the popular ArtNet protocol. It works with the dedicated MODUS DevManager software, so that the entire configuration is done remotely via Ethernet. This is an ideal solution for mounting the device in hard-to-reach places.

The converter has a 10V power output (max. 300mA) for convenient connection of potentiometers or external sensors - without the need for an external power supply.

Technical parameters

- Inputs:8x analog input 0-10V

Input resistance: 50kΩ

RJ45 (Ethernet, ArtNet)

Power input

- Power supply:12-24V DC, 200mA

Passive PoE or power connector

- Mounting:DIN/TH/TS 35 rail

- Dimensions:90/31/104 mm

- Configuration using DevManager software.

The manufacturer reserves the right to make changes in the functioning and operation of the device to improve the product